Call Us!
(08) 9228 3555

A Rinnai inverter split system is the most direct way to heat and cool a bedroom, living area or home office. We help you choose the right series and size, then install it neatly with the indoor unit, outdoor unit and pipe run properly planned.
Free quote · No obligation · Perth metro installation
No model number needed. We’ll clarify your home and recommend the next step.
As a guide, bedrooms usually need 2.5kW to 3.5kW, living areas 5.0kW to 7.0kW and large open-plan spaces 8.0kW or more. Room size, ceiling height, insulation, window size and afternoon sun all change the answer, so we confirm it with a heat load assessment before you buy.
Designed for Australia’s changing climate, the TX Series combines efficient heating and cooling with cleaner air and app control.
Switch on, set the temperature and adjust fan speed through the NetHome Plus app, or by voice with compatible Google Assistant and Amazon Alexa devices.
A Cold Catalyst filter and HEPA filter reduce up to 99% of bacteria and dust particles, as tested by independent laboratory Intertek.
The outdoor coil’s GoldGuard coating resists oxidation and corrosion better than standard coils, a real advantage near Perth’s coast.
Indoor sound pressure starts from 19.5 dB(A) on the 3.5kW model, and 3D airflow swings vertically and horizontally for even comfort.
Sleep mode adjusts gently overnight, the timer runs from 30 minutes to 24 hours and Turbo cools or warms the room quickly.
DRED-enabled to help reduce power use at peak times, with R32 refrigerant for lower global warming potential.
HEPA results tested by Intertek, reports 250626075GZU-007 and 250626075GZU-001. Demand control is subject to availability from your energy provider.

Every new split system carries a Zoned Energy Rating Label with ratings for hot, average and cold climates. Perth sits in the average zone, so that is the row to compare. We explain what each rating means for your room and your power bill.
Find the size that fits your room, then compare star ratings for the average climate zone that applies to Perth.
| TX Series model | Nominal capacity | Suitable room size* | Cooling stars (Perth zone) | Heating stars (Perth zone) | Quietest indoor level |
|---|---|---|---|---|---|
| HSNRTX25 | 2.5kW | 11-17m² | 5.0 | 3.5 | 20.0 dB(A) |
| HSNRTX35 | 3.5kW | 16-23m² | 4.5 | 3.0 | 19.5 dB(A) |
| HSNRTX50 | 5.0kW | 23-33m² | 4.0 | 2.5 | 20.0 dB(A) |
| HSNRTX60 | 6.0kW | 27-40m² | 3.5 | 2.5 | 20.0 dB(A) |
| HSNRTX70 | 7.0kW | 32-47m² | 3.5 | 2.5 | 21.0 dB(A) |
| HSNRTX80 | 7.6kW | 36-53m² | 3.5 | 2.5 | 21.0 dB(A) |
| HSNRTX90 | 9.0kW | 36-53m² | 4.0 | 2.5 | 22.5 dB(A) |
*Guide based on insulated ceilings up to 2.6m. Star ratings shown for the average climate zone. Sound levels are indoor sound pressure at minimum fan speed. Final sizing is confirmed by heat load assessment.
The TX Series suits most Perth homes, but Rinnai offers several series. We recommend the one that fits your room, priorities and budget. See our guide to choosing the right Rinnai system for WA homes.
HEPA filtration, GoldGuard coastal protection and built-in Wi-Fi with voice control, from 2.5kW to 9.0kW.
Up to 7 star efficiency, ECO+ AI energy saving, a smart human sensor and Turbo+ for rapid comfort.
Up to 6.5 star efficiency, long-distance airflow up to 12m, a self-cleaning function and Wi-Fi with voice control.
Up to 9 star efficiency, airflow up to 10m, demand control and Wi-Fi with voice control.
Up to 6.5 star efficiency, Wi-Fi control, demand control and quiet operation for everyday comfort.
Cooling-only models available in WA, with up to 8.5 or 9 star efficiency and Wi-Fi with voice control.
Series availability changes over time. Current models and pricing are confirmed in your quote.
Split systems are efficient and affordable for individual rooms. Here is what to weigh up before you decide.
If you need comfort in more than one room, multi-split or ducted may be the better long-term choice. Our split system vs ducted guide compares them in detail.
| Split system | Multi-split | Ducted | |
|---|---|---|---|
| Best for | One room or living zone | A few rooms, one outdoor unit | Whole-home comfort |
| Indoor units | One visible wall unit | One visible unit per room | Hidden in the roof, ceiling outlets only |
| Outdoor units | One per indoor unit | One shared outdoor unit | One outdoor unit |
| Room control | Per unit | Independent per room | Zoning with Rinnai Home or iZone |
| Upfront cost | Lowest | Moderate | Highest |
| Installation | Simplest | Moderate | Needs roof space and duct design |
We supply and install Rinnai inverter split systems across the Perth metropolitan area, including the northern, southern, eastern and western suburbs and the Perth Hills. ARC Tick licensed technicians plan the indoor unit position, the outdoor unit and the pipe run before installation, so the finished system is neat, quiet and easy to service.
The installed cost depends on the series and capacity you choose, where the indoor and outdoor units go, the length of the pipe run, electrical requirements and access. Your free written quote names the recommended Rinnai model and what is included, which is more reliable than comparing unit-only prices online.
If your current air conditioner struggles on hot days, runs noisily or keeps needing repairs, we can replace it with a current Rinnai model. We assess the existing unit, pipework, electrical supply and access, confirm what can be reused and include removal of the old unit where agreed in your quote.
A split system suits one room or a specific living zone. For several rooms, a Rinnai multi-split runs multiple indoor units from one outdoor unit, and Rinnai ducted air conditioning covers the whole home. Compare them in our split system vs ducted guide.
Straight answers on sizing, efficiency, heating and smart control.
Most bedrooms suit a 2.5kW to 3.5kW system. As a guide, the Rinnai TX Series 2.5kW model suits about 11-17m² and the 3.5kW model about 16-23m², based on insulated ceilings up to 2.6m. West-facing rooms and large windows may need more capacity.
Living areas typically need 5.0kW to 7.0kW, and large open-plan spaces 8.0kW or more. The TX Series 7.0kW model suits about 32-47m². Ceiling height, glazing and afternoon sun all matter, so we confirm the size on site.
Yes. Inverter split systems are among the most efficient ways to heat and cool a room because they adjust output instead of switching on and off. Compare the average climate zone on the Zoned Energy Rating Label, which includes Perth. Selected Rinnai series reach up to 9 stars.
Yes. Reverse cycle split systems move heat rather than create it, which makes them cheaper to run than many traditional electric heaters. The Rinnai TX Series is designed to heat in outdoor temperatures down to -15°C.
GoldGuard is a protective coating on the Rinnai TX Series outdoor condenser coil. It increases resistance to oxidation and corrosion compared with standard coils, which is valuable in coastal suburbs exposed to salt air. It also helps speed up defrosting in heating mode.
Yes. The TX Series has built-in Wi-Fi. Using the NetHome Plus app you can switch it on or off, set the temperature and adjust fan speed from anywhere, and it works with compatible Google Assistant and Amazon Alexa devices.
The installed cost depends on the Rinnai series and capacity, the indoor and outdoor unit positions, the pipe run, electrical requirements and access. We provide a free written quote showing the recommended model and what is included, rather than a generic online price.
Yes. We install Rinnai split systems across the Perth metropolitan area, including the northern, southern, eastern and western suburbs and the Perth Hills. Enter your suburb or postcode in the quote form and we will confirm availability.
Whole-home heating and cooling from one hidden system, with up to 8 zones.
Room-by-room control for up to 14 zones, from your phone or voice assistant.
50+ years in Australian homes, a 7 year warranty and national 1stCare service.